Description

Product Overview 34pcs Car Paintless Dent Removal Kit Slide Hammer Repair PDR Glue Puller Tabs Detail Features: This dent puller kit uses a lever-type design to repair any dent that is not sharp or creased. Easy to use, make glue stick on the dent, then pull the tabs and lift the dent with T-bar. Contains 33pcs different tabs to repair against a variety of dents. Work for the dents on the metal surfaces of car or other household appliances. Save a lot of money for you compared with the auto body shops, allow you to repair your cars by yourself. Specification: Item name: Car dent puller repair tool kit Material: Aluminum Alloy + Plastic Color: Silver T bar length: 43.5cm Please Note: This product needs to be used with hot melt adhesive, but hot melt adhesive is not included, you need to buy it yourself. How to use: 1. Clean damaged surfaces with a clean damp cloth. 2. Mount the glue stick into the glue gun, pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes. 3. Use a proper pulling tab. Large dent requires a large drawing gasket. 4. Pull the trigger and apply the pulling tab with extruded glue. 5. Fast place the pulling tab with hot melt glue at the center of dent, press lightly until the glue cures and adheres. 6. Use the T-pull dent repair tool to secure the pull tab and pull out the dent. 7. Check with a line board. If dent still exists, knock it slightly with a flattening hammer or pen. 8. Clean the repaired place with a clean wet cloth. Package Included: 1 X T bar tool 33 X Pulling tabs